Uneekor EYE XO, EYE XO 2 and ProTee VX are ceiling-mounted, camera-based launch monitors. For the purchasing decision, the available ceiling height, mounting position, required measurement data and selected software model are less dependent on the device shape. According to the manufacturer, ProTee does not require marked balls or club stickers. With Uneekor EYE XO and EYE XO 2, ball and club analysis as well as the Uneekor software environment are part of the concept, with the specific range of functions depending on the hardware and software license.
The systems at a glance
The Uneekor EYE XO inkl. Swing Optix is an overhead system with high-speed cameras. The product variant includes Swing Optix for camera-based viewing of the swing. For the EYE XO, Uneekor mentions integration with its own QED/Refine environment as well as compatibility with E6, The Golf Club and Creative Golf. The EYE XO 2 is the successor within the product series and expands camera-based capture, but also remains a ceiling system with a fixed mounting area.
The ProTee United VX is also installed above the hitting area. ProTee relies on a camera-based system and explicitly mentions use without special golf balls or club stickers. This is practical when your own clubs, rental clubs or different balls are changed regularly.
Mounting position, ceiling height and hitting area
Common feature: clear floor space
With both product lines, there is no device next to the ball and no radar behind the player. The hitting area therefore remains clear on the floor. This makes it easier to switch between right- and left-handed players and reduces the risk of hitting the launch monitor with a club or ball.
The manufacturers envisage mounting directly above or in front of the hitting point. The exact distance to the Tee position, height and alignment must be set up for ceiling-mounted launch monitors according to the respective installation instructions. A deviation changes the captured area and can impair measurements. Power supply, network connection and a powerful Windows PC must be planned for the installation.
Uneekor EYE XO and EYE XO 2
For EYE XO and EYE XO 2, Uneekor specifies a mounting height in the range of 9 to 10.5 feet. This corresponds to around 2.74 to 3.20 metres. However, a ceiling height in this range is not automatically sufficient: beams, lamps, projector mounts and the actual swing path reduce the usable height. Especially in a basement, the clear height at the hitting point should be checked, not just the shell construction height.
The strike area specified by Uneekor is 28 by 21 inches, or around 71 by 53 centimeters. The ball must be within this area. This allows for a fixed central hitting point, but not an arbitrarily wide area for different mat positions. The article Hitting Mats for Indoor Golf: Types, Dimensions and Buying Checklist can help with planning a suitable base.
ProTee VX
ProTee also specifies ceiling installation for the VX at a height between 9 and 10.5 feet, or approximately 2.74 to 3.20 meters. The manufacturer states a strike area of 28 by 21 inches. This means that ProTee VX and the EYE-XO family are closely aligned in terms of the basic requirements for ceiling height and ball position.
In low basement rooms, neither system therefore solves the core problem of insufficient swing height. If the ceiling is below the manufacturer's requirements or a full Driver swing is not safely possible, the room should be measured before deciding on a device. A checklist covering width, depth, height and safety clearance is available on the sister site at Space Requirements for a Golf Simulator.
Ball and club data compared
The three systems record ball flight and club data using cameras. The ball values specified by Uneekor for the EYE XO platform include ball speed, launch angle, launch direction, Backspin, side spin, Spin Axis, Carry and total distance. For club analysis, Uneekor lists, among other things, club speed, Smash Factor, Angle of Attack, Club Path, Face Angle, Dynamic Loft, Lie Angle and impact point on the clubface. Which values are visible also depends on the Uneekor software used and, where applicable, on activated analysis functions.
The EYE XO 2 is designed within the Uneekor range for extended camera capture. Anyone specifically weighing up EYE XO 2 against another overhead system can find the distinction from TrackMan iO in the article Uneekor EYE XO2 vs. TrackMan iO. For this comparison with the ProTee VX, the key point is that both concepts provide not only pure ball flight values, but also values relating to club movement.
For the VX, ProTee lists ball speed, vertical launch angle, launch direction, Backspin, side spin, Spin Axis, Carry, total distance, maximum height and flight time. According to the manufacturer, club values include club speed, Smash Factor, Angle of Attack, Club Path, Face Angle, Dynamic Loft and impact point on the clubface. ProTee does not require marked balls or club stickers for recording.
The data lists are not a promise that every software program displays every measured value in the same way. Simulator programs often only use the values they need for ball flight and course simulation. For targeted technical training, you should therefore check before purchasing whether the desired Uneekor or third-party software actually displays the required club data.
Links and right-handed players
The ceiling position generally makes both systems suitable for Links and right-handed players. There is no need to reposition a ground-level launch monitor between shots. The decisive factor remains the room geometry: The central ball area must have sufficient free swing space on both the left and right. In a narrow basement, the sideways backswing movement may be more important than the room height alone.
With the ProTee VX, sticker-free club tracking makes it easier to switch within groups using different clubs. With Uneekor, especially when users change regularly, you should check which club marking is intended for the desired club data recording. A consistent supply can also make sense for balls used continuously indoors; the Golf Ball Buying Guide from golfballs.at contains advice on selection and condition.
Software compatibility and ongoing costs
For the EYE XO, Uneekor lists its own QED/Refine environment as well as E6, The Golf Club and Creative Golf. The EYE XO is operated with a software environment; the available training and course functions depend on the respective Uneekor package and on possible third-party licenses. Swing Optix concerns video analysis and does not replace simulator software.
For the ProTee VX, the manufacturer lists ProTee Labs software and compatibility with E6 CONNECT, GSPro, The Golf Club 2019 and Creative Golf. GSPro, E6 CONNECT, Creative Golf and The Golf Club are independent software products. Their purchase price, subscription or upgrade model is not included in the hardware price of the launch monitor and must be checked separately with the respective provider.
Ongoing costs can therefore only be clearly separated as follows: The launch monitor is hardware, while simulator and analysis programs may incur additional license or subscription costs. Without binding details about the specific Uneekor or ProTee software package selected, no blanket annual amount should be assumed. The overall planning should also include the PC, projector, impact screen, mat, installation and, where applicable, setup costs. golfsimulator.kaufen in its golf simulator guide provides an overview of these components.
Decision matrix
- Home theater golf room: Choose EYE XO, EYE XO 2 or ProTee VX only if there is at least 2,74 meters of usable ceiling height in the installation area. The ProTee VX is particularly suitable if you want to work without ball and club markings. The EYE XO is suitable if Swing Optix and the Uneekor analysis environment are part of the training concept.
- Basement: First measure the clear height at the swing and installation point. If it is below 2,74 meters or beams obstruct the space, none of the ceiling-mounted launch monitors compared here is a safe recommendation without individual assessment. Also check the lateral freedom of movement for both handednesses.
- Commercial facility: Conceptually, both systems are suitable for fixed bays with a central hitting point. ProTee VX reduces organizational effort by eliminating the need for marked balls and club stickers. Uneekor makes sense if the desired training and video analysis is planned via Uneekor software. Software licenses and PC management must be calculated per bay.
- Changing handedness: Both ceiling-mounted systems are suitable for this because no floor-level sensor needs to be repositioned. ProTee VX is the more direct choice if many people with different clubs are to play without markers or stickers. With EYE XO and EYE XO 2, the requirements for the desired club data capture should be clarified in advance.
Frequently asked questions
What room height do Uneekor EYE XO, EYE XO 2 and ProTee VX require?
The manufacturers specify a range of 9 to 10,5 feet for ceiling installation, or approximately 2,74 to 3,20 meters. The actual clear height at the hitting and installation point is decisive.
Can the ProTee VX be used without marked golf balls?
Yes. ProTee states for the VX that no marked balls or club stickers are required.
Are Uneekor EYE XO and ProTee VX suitable for Links and right-handed players?
Yes. Both are mounted on the ceiling above the hitting area. Sufficient lateral clearance for the swing paths of both handednesses is required.
Which software works with the Uneekor EYE XO?
Uneekor names its own QED-/Refine environment as well as E6, The Golf Club and Creative Golf. The exact range of functions depends on the respective software license.
Are there ongoing costs for ProTee VX or Uneekor EYE XO?
Additional license, subscription or upgrade costs may arise for simulator and analysis programs. These depend on the selected Uneekor, ProTee or third-party software package.